full list of parts:
- Bearing 47/20/14 mm - C3 (Set of 2) (M005)
- Oil seals viton 20/35/7 mm (Set of 2) (M006)
- Piston roller bearing Factory-R (MFR009)
- COPPER LOCK NUT HIGH TEMPERATURE 8 X 1,25 MM (SET OF 5) (M019.5) 3x
- Antivibration mount 40 x 45 mm - M8 x 15 mm (Set of 2) (MFR021a)
- Antivibration mount 40 x 45 mm - M8 x 25 mm (Set of 2) (MFR021b)
- Complete series of gaskets and O-ring (MFR025)
- Spark-plug cap (Selettra) (M031a)
- Kit Plastic hook (Set of 2) with Shim washers 12 x 18 mm (Set of 6) and Elastic ring (MP055k)
- Starter rope 2,20 meters, black (MFR043)
- Reed valve petal (Set of 2) (MFR082) 2x
- Series membranes and gaskets Walbro WB (M097)
- Air-box rubber manifold with incorporated sponge (AT093a)
- SNAPLOCK FEMALE Ø 16 MM, GREY (SET OF 4) (MP093d.4)
- FIXING BAND 50-70 MM (SET OF 2) (M094.2)
- Complete clutch (MP102)
- SEEGER Ø 35 MM DIN 472 (SET OF 5) (MP105.5)
- Bearing 35/15/11 mm - 2Z and Bearing 35/15/11 mm - 2HRS (MP106)
- Seeger Ø 15 mm DIN 471 (Set of 5) (MP107.5)
- Drum/Pinion cap, Factory-R (Set of 2) (MFR107a.2)
- Bearing 42/20/12 mm (Set of 2) (M114)
- Exhaust flange with assembled Bushing 40/50 hours and Springs (MY201)
- Antivibration mount 30 x 20 mm soft (left) 14/20 mm with Nuts (M151a) 2x
- Antivibration mount 30 x 20 mm hard (right) 14/20 mm with Nuts (M151b)
- Noise absorbent material with Rivets (MP159)
- Exhaust chromed Factory-R, initial part (MFR200a)
- Exhaust spring (Set of 5) (M139.5) 2x
- Iridium EIX spark-plug (ACC090) 2x
- Belt Poly V PJ483 15 grooves (M117) 2x
- Security band (Set of 4) (C021f)
- Heat shrinkable tubing (Set of 5) (MP140.5) 2x
- Security cable 45 cm with aluminum clamp (Set of 5) (MP141.5) 2x